Aluminium Die Casting Release Agent

Aluminium Die Casting Release Agent

Aluminium die casting release agent is consist of synthetic wax, synthetic oil, modified siloxane and emulsifier.These raw materials are imported from Germany, USA and some of them are from domestic first-class enterprises.

Aluminium die casting release agent physical and chemical index: unlimited miscible in water (water-soluble), milky white liquid (droplet polarized light blue), no flash point, aromatic taste, PH8.0-PH9.0, density 0.96-0.97g/cm3

Aluminium die casting release agent application

1. Using tap water dilution (do not use well water dilution), manual slight stirring even (use release agent mixer, don’t use uninterrupted compressed air stirring), note: above 2 prohibited, will cause release agent "demulsification aggregation ";

2. Adopt only spray gun or automatic spraying system, spray evenly and blow dry to ensure casting quality;

3. The optimum use of aluminium die casting release agent is between 200°C and 300°C.

4. Dilution ratio: according to the casting complexity, die depth ratio, aluminum alloy Si content.

Caution

Attention to custody: anti-freezing sunscreen, indoor custody, after opening attention to seal cover.

The shelf life is 6 months for the liquid seal.

Emergency treatment: If leakage, clean with water.